Vertikale bewerkingscentra CNC Johnford X: 4100 - Y: 2800 - Z: 800 mm CNC 5 axes
Teknik Bilgiler
- Table longitudinal travel (X-axis)4100 mm
- Cross travel head (Y-axis)2800 mm
- Height travel head (Z-axis)800 mm
- Table dimensions4200 x 2400 mm
- Passage between uprights2800 mm
- Admission in spindle (ISO)BT50
- Power on the spindle30 kW
- Control (type)Heidenhain TNC 530
- Number of axes5 axes
- Toolchangeryes
- Number of toolholders40 toolpositions
- Number of rotations (from X to Y rpm)6000 rpm
- Length L -- R11055 mm
- Depth Fw -- Bw6320 mm
- Height4140 mm
- Weight45 ton
Ek bilgi
Type: DMC-4100LH
2800 mm between columns!!
MA-25 2-axis universal milling head - 20 kW - 6000 rpm
> C-range: 0-360°
> A-axis range: +/- 110°
Cooling door spindle 40 bar
Total power: 67 kW
No foundation needed!
Johnford DMC Series double-column moving table bridge mill is created from a one-piece Meehanite cast iron bridge/column assembly that reportedly takes up 30 percent less floor space than comparable C-frame vertical machining centers. Available in both moving table and sliding column (fixed-table) versions, ranging from 36- x 36- x 30-inches of travel up to 60-ft. x 20-ft., the bridge mills have a long base casting with complete support of the table over the full 51 inches of Y-axis travel, allowing massive loads to be machined.
The Y and Z axes hold fixed loads at all times while the X-axis carries the only dynamic load allowing for tight machining and tight tolerances during high-speed machining operations. Because there is no table overhang, X-axis pitch and yaw are eliminated. The spindle centerline-to-column distance is minimized offering further rigidity. The machine's heavily ribbed cast iron construction provides long tool life and part surface finish. The combination of twin screw-type conveyors and a caterpillar conveyor ensures complete chip removal with little manual cleaning. Additionally, finite element analysis (FEA) is used to design each bridge mill, simulating the effects of real world conditions, including vibration, heat, fluid flow and other physical impacts.
- Tip/Model: X: 4100 - Y: 2800 - Z: 800 mm CNC 5 axes
- Stok numarası: D.01 14271
- Kategori: [D] Uygulama merkezi
- Alt kategori: [D.01] Vertikale bewerkingscentra CNC
- Marka: Johnford
Stok numarası: D.01 14271